Non-contact safety switches |
STR1
- System part: Sensor and actuator
- Actuator design: Standard
- Coding: Uniquely coded
- Safe switch on distance Sao: 10 mm
- Connection type Detail: Cable with plug M12, 5-pin
- Length of cable: 0.2 m
- Safe series connection: With Flexi Loop (with diagnostics)
- Auxiliary contact (AUX): 1 (Switching behavior complementary to OSSDs)
-
Features
System part Sensor and actuator Sensor principle Transponder Number of safe outputs 2 Auxiliary contact (AUX) 1 (Switching behavior complementary to OSSDs) Safe switch on distance Sao 10 mm (–30 °C ... +70 °C) 1) Safe switch off distance Sar 25 mm 1) Active sensor surfaces 3 Actuation directions 5 Coding Uniquely coded - 1) Values apply for the frontal alignment of the sensor to the actuator. A detailed display of the alignment options and values can be found in the operating instructions.
-
Technical drawings
Dimensional drawing Sensor with cable and male connector
Dimensional drawing ''Standard'' actuator
Response range ''Standard'' actuator, active front sensor surface
Response range ''Standard'' actuator, active side sensor surface
Connection diagram
Connection single sensor
Series connection with Flexi Loop (with diagnostics)
Connection diagram STR1 transponder safety switch to RLY3-OSSD2 safety relay
Connection diagram Parallel connection of two STR1 transponder safety switches to a Flexi Classic safety controller
US 7218 
BR 2619 
AU 1485 
TH 1461 
JP 1381 
SG 1146 
CA 986 
MY 892 
